Floater Kits

STRANGE PRO TOURING FLOATER KITS (Axles & Brake Kit sold separately)
The street floater kit is highlighted by the forged Chrome-Moly spindles, Chrome-Moly hubs and 31 or 35 spline drive plates for the ultimate in strength and safety. When paired with the proprietary Wilwood brakes, this system eliminates piston knock-back and keeps performance and feel of the brakes consistent, every time. 4 ½”, 4 ¾” and 5” patterns are available. Spindles will work with 3” & 3 ¼” diameter tubes.
These kits comprise of the following items:
•  ½”-20 or 5/8”-18 press in studs
•  4 ½”, 4 ¾”, & 5″ bolt pattern hubs
•  Bearings, spacers and hardware for installation included
Item Number Description
#STR-F5010-1/2 STRANGE PRO TOURING FLOATER KIT 35 SPLINE 1/2″ STUDS
#STR-F5010-5/8 STRANGE PRO TOURING FLOATER KIT 35 SPLINE 5/8″ STUDS
#STR-F5011-1/2 STRANGE PRO TOURING FLOATER KIT 31 SPLINE 1/2″ STUDS
#STR-F5011-5/8 STRANGE PRO TOURING FLOATER KIT 31 SPLINE 5/8″ STUDS
ALLOY 700 SERIES FLOATER KITS
Engineer / DOT approved for road use.
700 series floater kits are designed for up to Hilux sized diffs. These kits have been designed to keep the hub width to a minimum, allowing plenty of clearance to factory suspension brackets and easy fitment to smaller diffs eg: Sprinter, Escort and Mazda
Item Number Description
#700-4X110 30/90 SPLINE 4X110mm PCD ALLOY FLOATER KIT
#700-4×4.25 30/90 SPLINE 5X4.25″ PCD ALLOY FLOATER KIT
#700-4×4.5 30/90 SPLINE 4X4.5″ PCD ALLOY FLOATER KIT
#700-5×4.5 30/90 SPLINE 5X4.5″ PCD ALLOY FLOATER KIT
#700-28-4×110 28/90 SPLINE 4x110mm PCD ALLOY FOATER KIT
#700-28-4×4.25 28/90 SPLINE 4×4.25″ PCD ALLOY FOATER KIT
#700-28-4×4.5 28/90 SPLINE 4×4.5″ PCD ALLOY FOATER KIT
#711-CM BOLT ON SPINDLE UPGRADE – 4140 – PAIR
DSCF2020
ALLOY 1500 SERIES FLOATER KITS
Engineer / DOT approved for road use.
These kits comprise of the following items:
•  Billet 7075 alloy hubs (Red anodised)
•  High strength steel weld in spindles (Flanged available)
•  High strength chrome molly drive plates (28,31 & 35 spline)
•  High strength chrome molly wheel studs (1/2”, M14 or 5/8”)
•  Billet 6061 alloy end caps (Red anodised)
•  “Timken” bearings & seals
•  Lock nuts (L/H & R/H thread)
•  Chrome molly locking rings
•  O-rings
•  All fasteners supplied for kit
Item Number Description
#1500-31-4.5 31/90 SPLINE 5×114.30mm PCD ALLOY FLOATER KIT
#1500-31-120 31/90 SPLINE 5×120.00mm PCD ALLOY FLOATER KIT
#1500-31-4.75 31/90 SPLINE 5×120.65mm PCD ALLOY FLOATER KIT
#1500-35-4.5 35/60 SPLINE 5×114.30mm PCD ALLOY FLOATER KIT
#1500-35-120 35/60 SPLINE 5×120.00mm PCD ALLOY FLOATER KIT
#1500-35-4.75 35/60 SPLINE 5×120.65mm PCD ALLOY FLOATER KIT
DSCF2020
STEEL 1500 SERIES FLOATER KITS
Engineer / DOT approved for road use.These kits comprise of the following items:
These kits comprise of the following items:
•  Billet Steel hubs with (3) stud patterns 5 x 4.5”, 4.75” & 120mm PCD (Black oxide finish)
•  High strength steel weld in spindles (Flanged available)
•  High strength chrome molly drive plates (31 & 35 spline)
•  High strength chrome molly wheel studs (1/2”, M14 or 5/8”)
•  Billet 6061 alloy end caps (Red anodised)
•  Bearings & seals
•  Lock nuts (L/H & R/H thread)
•  Lock washers
•  O-rings
•  All fasteners supplied for kit
Item Number Description
#1500-28-S 28/90 SPLINE 5 STUD STEEL FLOATER KIT
#1500-30-S 30/90 SPLINE 5 STUD STEEL FLOATER KIT
#1500-31-S 31/90 SPLINE 5 STUD STEEL FLOATER KIT
#1500-35-S 31/60 SPLINE 5 STUD STEEL FLOATER KIT
ALLOY 2500 SERIES FLOATER KITS
These kits comprise of the following items:
•  Billet 7075 alloy hubs (Red anodised)
•  High strength chrome molly weld in flanged spindles
•  High strength chrome molly drive plates (35 & 40 spline)
•  High strength chrome molly wheel studs (5/8”)
•  Billet 6061 alloy end caps (Red anodised)
•  “Timken Bearings”
•  Lock nuts (L/H & R/H thread)
•  Chrome molly locking rings
•  O-rings
•  All fasteners supplied for kit
Item Number Description
#2500-35-4.5 35/60 SPLINE 5X4.5″ & 5X4.75″ PCD ALLOY FLOATER KIT(INC DISCS & WILWOOD CALIPER MOUNTS)
#2500-40-4.5 40/90 SPLINE 5X4.5″ & 5X4.75″ PCD ALLOY FLOATER KIT (INC DISCS & WILWOOD CALIPER MOUNTS)
#2500-35-5 35/60 SPLINE 5X5″ & 5X5.5″ PCD ALLOY FLOATER KIT (INC DISCS & WILWOOD CALIPER MOUNTS)
#2500-40-5 40/90 SPLINE 5X5″ & 5X5.5″ PCD ALLOY FLOATER KIT (INC DISCS & WILWOOD CALIPER MOUNTS)